User manual

Start Here ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page32of209 ProSoftTechnology,Inc.
 September19,2011

1.8.6 Configure the ILX34-AENWG for Wireless Access
YoucanconfiguretheILX34‐AENWG'swirelesssettingsfromtheMODULEPROPERTIESdialogboxin
RSLogix5000,orfromtheILX34‐AENWG'swebpage(page32).Thefirsttimeyouconfigurethe
adaptor,youshouldusetheadapter'swebpage.

Important: The wireless settings for the ILX34-AENWG must be compatible with the Industrial
Hotspot radio (page 19) connected to the Ethernet bridge (for example, a 1756-ENBT module in a
ControlLogix rack).
Important: All radios on the network must use the same settings, otherwise they will be unable to
communicate with each other.

Connect to the Adapter's Web Page
Openyourwebbrowser(forexample,MicrosoftInternetExplorerorFirefox),andconnecttothe
adapter'stemporarynetworkaddress.
http://192.168.1.xxx
(wherexxxisthevalueyouenteredintherotaryswitchesonthefrontoftheadapter.)

Important: Your PC must be on the same TCP/IP subnet as the adaptor to view these pages.
Important: You must prefix the numeric IP address with "http://", otherwise the web browser
may not be able to interpret the address.
