User manual

Start Here ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page24of209 ProSoftTechnology,Inc.
 September19,2011

Caution: Do not connect 120/240V ac power to this supply.
Warning: If you connect or disconnect wiring while the field-side power is on, an electrical arc can
occur. This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.



WhenyoupowerupthePOINTI/Oforthefirsttime,theadaptermustassignaddressestoevery
moduleinthebackplane.POINTI/Omodulesareallinitiallyconfiguredatthesameaddress.
Whenyoufirstapplypower,allbutonemoduleonthebackplaneshouldshowasolidred
ModuleStatusLED.
Onebyone,theadapterresetsthesemodulesandassignsaddresses.Theamountoftimethat
thisoperationtakesdependsonthesizeofyourPOINTI/Osystem.