User manual

Reference ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page184of209 ProSoftTechnology,Inc.
 September19,2011

6.4 ILX34-AENWG Wireless Configuration Object (102, 0x66) Vendor
Specific
OneInstanceoftheWirelessConfigurationObjectwillbeavailablefortheradiomodule.The
followingtablesdescribetheinstancedefinitioninadditiontothenormalClassrequired
definitionsforthisobject.

6.4.1 Instance Services Supported
Service Code No. (hex) Service Name
01 Get Attribute All
0E Get Attribute single
10 Set Attribute Single
4B Apply Configuration
This service code is allowed after all attributes have been updated to apply the
configuration to the radio module and reset for settings to take effect.
05 Reset

6.4.2 Attributes Supported
Inst ID Attribute Description Get Set Size Default Value / Description
0 1 Object Software
Revision
X - Word 1
2 Max Instance X - Word Depends On Ports Supported
1 1 IP Address X X Long IP address of radio module.
Default: = AutoIP 0.0.6.0
2 Security Flags X X Byte Radio Module enables (see Configuration
Parameters Description)
Default: 0x44,
Resvr(b7 =0)
SNMP(Disable b6=1), WebServ(Enable b5=0),
Pt,77FEh(Enableb4 =0), Enh PW(Disable b3=0),
Encrypt(Enable b2=1),
TFTP(Enable b1=0),
Telnet(Enable b0=0)
3 Range X - Byte Max supported Range in Kilometers.
Default: 20 kM
4 MAC Address X - Array(6) of
word
Radio assigned MAC address.
Default: Radio
5 802.11 Country
Code
X X String (3) 802.11 Country Code: (3 bytes) Region of use
IEC/ISO 3166-1 Alpha-2, encoding of the country
code value for the following countries of use and
environment per 802.11 standard
(Refer to Configuration Parameter Table for
description)
Default: 2 = JP, Inclusion of (0=US)