User manual
ILX34-AENWG ♦ Point I/O Platform Reference
Wireless POINT I/O Adapter User Manual
ProSoftTechnology,Inc. Page183of209
September19,2011
6.3.3 Attributes Supported: Wireless Diagnostics Vendor Specific
Inst ID Attribute Description Get Set Size Default Value / Description
0 1 Object Software
Revision
X - Word 1
2 Max Instance X - Word 1
1 1 Radio Firmware
Number
X - Long Radio Module firmware revision. (Example: 6006 -
> 6.60)
2 Radio Link Time X X Struct
( Word -
Days,
Word -
Hours,
Word -
Min's,
Word -
Sec's)
Radio Operational time. Resettable.
3 Radio Parent
MAC address
X - Array (6)
of Byte
Connected Parent MAC address.
4 Parent Data Rate X - Word Data rate of connection to parent.
Data Rate TX Enumerated Rate Setting:
1, 2 ,5.5, 6, 11, 12, 18, 24, 36, 48, 54 (Mbps)
5 Average Signal
Level
X - Word Signal strength in dBm of link to parent.
6 Average Noise
Level
X - Word Noise Level in dBm.
7 Packets Tx
Success
X X Struct
(Long,
Long
Total Packet count and Avg/sec of successfully
tramsitted packets. Resettable.
8 Packets Tx
Failures
X X Struct
(Long,
Long
Total Packet count and Avg/sec of failed
tramsitted packets. Resettable
9 Packets Tx
Retries
X X Struct
(Long,
Long
Total Packet count and Avg/sec of retries of
tramsitted packets. Resettable
10 Packets Rx
Success
X X Struct
(Long,
Long
Total Packet count and Avg/sec of successfully
received packets. Resettable
11 Radio Actual IP
Address
X
Long Radio IP Address Used
12 Extended Radio
FW Version
X
String Extended Radio Firmware version in string
format.
100 Get and Clear
Counters
X X All Get and reset wireless diagnostic counters, only
for Service code 0x4C.