User manual

ILX34-AENWG ♦ Point I/O Platform Ladder Logic
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page173of209
September19,2011

1734-232ASC
1734 POINT I/O Catalog Number RSLogix5000 Module Description
1734-232ASC 1 Channel ASCII Interface Module

Configuration Data Data Type Default Value Valid Data Values
Transmit End Delimiter Mode SINT 2 0=No End Delimiter
1=Exclude End Delimiter
2=Include End Delimiter
Transmit End Delimiter Character SINT 13
(0x0d)
Any Valid ASCII Character
(Default is Carr. Return)
Consume String Data Type SINT 1 0=Array
1=Short String
2=String
Transmit Swap Mode SINT 0 0=Disabled
1=16-bit Swap Enabled
2=24-bit Swap Enabled
3=32-bit Swap Enabled
DeviceNet Record Header Mode SINT 0 0=Transmit Handshake
1=Transmit Immediate

Transmit Data / Receive Data / Delimiter / Pad Character
Note: 7 data bits allows ASCII Character data values of 0 to 127, which RSLogix 5000 software
does support in the signed Short Integer data type SINT (-128 to +127 range).
Note that 8 data bits allows ASCII Character data values of 0 to 255.
To enter values from +128 to +255, use this conversion formula:
Desired Decimal Value - 256 = Entered Decimal Value.
Example: for an ASCII Character value of 128,
128 - 256 = -128
