User manual

ILX34-AENWG ♦ Point I/O Platform Start Here
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page15of209
September19,2011

1.3 System Requirements
TheILX34‐AENWGadapterrequiresthefollowingminimumhardwareandsoftwarecomponents:
 RockwellAutomation
®
processor,withcompatiblepowersupply
o ControlLogix
®
1756‐L6x(firmwareversion17.03orhigher),or1756‐6xS(firmware
version17.07orhigher)
or
o CompactLogix™1769‐L32Eor1769‐L35E,(firmwareversion17.04orhigher)
 RockwellAutomationRSLogix5000programmingsoftwareversion16orhigher(page195).
Version17isrequiredifyouwishtousetheILX34‐AENWGAdd‐OnProfile.
 RockwellAutomationRSLinxcommunicationsoftwareversion2.54orhigher
 An
802.11gRadio.ProSoftrecommendstheRLXIB‐IHW802.11a/b/gIndustrialHotspot
(page19).
 IfyouplantousetheILX34‐AENWGwitha1756‐ENBTmoduleor1768‐ENBTmodule,note
thefollowingfirmwareversionrequirements:
o 1756‐ENBTfirmwarerevision4.007orlater
o 1768‐ENBTfirmwarerevision2.003orlater
o UseBootPrevision2.3.2orlatertoassignIPaddressestotheadapter.
 Pentium
®
II450MHzminimum.PentiumIII733MHz(orbetter)recommended
 Supportedoperatingsystems:
o MicrosoftWindowsVista
o MicrosoftWindowsXPProfessionalwithServicePack1or2
o MicrosoftWindows2000ProfessionalwithServicePack1,2,or3
o MicrosoftWindowsServer2003
 128MbytesofRAMminimum,256MbytesofRAMrecommended
 MicrosoftWindowsExplorerversion7
 256‐colorVGAgraphicsadapter,800x600minimumresolution(TrueColor1024768
recommended)
 CD‐ROMdrive

Note: The Hardware and Operating System requirements in this list are the minimum
recommended to install and run software provided by ProSoft Technology. Other third party
applications may have different minimum requirements. Refer to the documentation for any third
party applications for system requirements.
