User manual

Ladder Logic ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page138of209 ProSoftTechnology,Inc.
 September19,2011

5.2.5 Digital 2 POINT Output - Without Diagnostic Status
1734 POINT I/O Catalog Number RSLogix5000 Module Description
1734-OA2 2 POINT 120V ac Output
1734-OW2 2 POINT ac/dc Relay Output
1734-OX2 2 POINT Relay Output N.O./N.C.

Configuration Data Data Type Default Value Valid Data Values
Fault Mode - POINT 0, 1 SINT, BIT 0 0=Fault Value
1=Hold Last State
Fault Value - POINT 0, 1 SINT, BIT 0 0=Off
1=On
Program Mode - POINT 0, 1 SINT, BIT 0 0=Program Value
1=Hold Last State
Program Value - POINT 0, 1 SINT, BIT 0 0=Off
1=On

Input Data Data Type Default Value Valid Data Values
None
 

Output Data Data Type Default Value Valid Data Values
Output Data - POINT 0, 1 SINT, BIT 0 0=Off
1=On
