User manual

Diagnostics and Troubleshooting ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page130of209 ProSoftTechnology,Inc.
 September19,2011

4.11.6 Testing the new firmware installation
TurnoffthepowertoyourILX34,waitafewseconds,thenturnpoweron.OncethePointBus
StatusLEDisnolongersolidRED,theunitshouldbeoperationalwiththenewfirmware.
Toverifythenewfirmwareversion,openawebbrowsertotheILX34’sIPaddress.You
should
seeascreenlikethefollowing:

TheimportantthingtonoticeisthattheProductRevisionis3.005Build0,whichistheversionof
firmwarethatyoujustinstalled.
