User manual

ILX34-AENWG ♦ Point I/O Platform Start Here
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page13of209
September19,2011

1 Start Here
In This Chapter
 Overview...........................................................................................................14
 PackageContents..............................................................................................14
 SystemRequirements.......................................................................................15
 InstalltheConfigurationTools..........................................................................16
 PlanningtheNetwork........................................................................................17
 PlanningthePhysicalInstallation......................................................................19
 ConfiguretheWirelessAccessPoint.................................................................19
 InstalltheAdapter.............................................................................................22


TogetthemostbenefitfromthisUserManual,youshouldhavethefollowingskills:
 RockwellAutomation
®
RSLogix™software:launchtheprogram,configureladderlogic,and
transfertheladderlogictotheprocessor
 MicrosoftWindows:installandlaunchprograms,executemenucommands,navigatedialog
boxes,andenterdata.
 Hardwareinstallationandwiring:installtheadapter,andsafelyconnectAENWGandPOINT
I/Odevicesto
apowersourceandtotheILX34‐AENWGadapter’sapplicationports.
 
Caution: You must be able to complete the application without exposing personnel or
equipment to unsafe or inappropriate working conditions.
Important: You must use series C POINT I/O modules with the ILX34-AENWG adapter. Series A
or B POINT I/O modules will not work with this adapter.
