User manual

Diagnostics and Troubleshooting ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page100of209 ProSoftTechnology,Inc.
 September19,2011

Services Page
TheSERVICESpageopenswhenyouselecttheCONFIGURATIONfolderinthemenuontheleftsideof
thepage,andthenclicktheS
ERVICESlink.Usethispagetodisabletheadaptor'swebserver,orto
changethepassword.
Important: The values on this page are in non-volatile memory. Changes to these parameters do
not take effect until you reset or cycle power to the ILX34-AENWG adapter.


Field Description
Service Thenetworkservicetype.Only"HTTP"isavailableforconfiguration
ontheILX34‐AENWG
Description Thenetworkservicedescription.Only"WebServer"isavailablefor
configurationontheILX34‐AENWG
Status RunningorDisabled
Enable Select(check)toenablethewebserver.
Deselect(uncheck)todisablethewebserver.
Changeswilltakeeffectthenexttimethemoduleisreset.
Tore‐enablethewebserver,resetthefactorynetworkparametersas
describedinRestoringtheFactoryDefaultNetworkSettings(page
114).
Set Password
Field Description
NewPassword Tochangethepassword,typethenewpasswordintothisfield,and
thentypeitagaininthe"ConfirmPassword"field.
 ThepasswordisCaSeSeNsItIvE.
 Thedefaultpasswordistheword"password".
ConfirmPassword
