User manual

Diagnostics and Troubleshooting ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 86 of 177 ProSoft Technology, Inc.
August 16, 2013
Image
Signal Strength
Signal to Noise
-60 dBm or greater
30 dB
4.1.2 Configuration Pages
The CONFIGURATION pages allows you to view and edit configuration information
for your ILX34-AENWG I/O adapter and connected devices. Select the
CONFIGURATION folder in the tree view on the left side of the page, and click
EXPAND to view the menu, or click the tabs at the top of the page.
Important: The values on these pages are in non-volatile memory. Changes to these parameters
do not take effect until you reset or cycle power to the ILX34-AENWG adapter.
Some of the configuration pages require you to provide a user name and
password.
 The default user name is "admin".
 The default password is "password".
 The user name and password are case sensitive.
Identity Page
The IDENTITY page opens when you select the CONFIGURATION folder in the menu
on the left side of the page, and then click the IDENTITY link. Use this page to
view or modify the ILX34-AENWG adapter's name, location and chassis size.
Important: The values on this page are in non-volatile memory. Changes to these parameters do
not take effect until you reset or cycle power to the ILX34-AENWG adapter.