User manual

Diagnostics and Troubleshooting ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 84 of 177 ProSoft Technology, Inc.
August 16, 2013
Wireless Statistics Page
The WIRELESS STATISTICS page opens when you expand the DIAGNOSTICS folder,
and then click the WIRELESS STATISTICS link on the left side of the page. Use this
page to view configuration and status information for the Wireless port on the
ILX34-AENWG.
Link Information
Field
Description
Signal Strength
The colored graph indicates the signal Signal Strength Graph
(page 85).
Signal to Noise
 < 0 , this is a BAD condition
 < 10, this is an OK condition
 > 10, this is a GOOD condition
Radio Link Time
The up-link time in days:hours:minutes:seconds.
Note: This link status is checked at the Refresh rate, once every
10 seconds by default. If the link is down for less time than this,
the up-time for the link will not get reset to 0.
Radio Parent MAC
The MAC address (hexadecimal) of the parent radio (access
point)
Data Rate
Rf rate of the last packet received by the ILX34-AENWG.
Although this field is informational, some packets, such as
802.11 management packets, will be at a rate that is lower than
the data. In such an instance, the data could be going at a rate
faster than this.