User manual

ILX34-AENWG ♦ Point I/O Platform Configure the ILX34-AENWG
Wireless POINT I/O Adapter User Manual
ProSoft Technology, Inc. Page 37 of 177
August 16, 2013
2 Expand the COMMUNICATIONS node, and then select the ETHERNET BRIDGE
module that matches your hardware. This example uses a 1756-ENBT/A
module.
Note: If you are prompted to "Select Major Revision", choose the lower of the available revision
numbers.
3 Name the ENBT/A module, then set the IP Address and slot location in the
local rack with the ControlLogix processor.
4 Click OK.