User manual

Start Here ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter
Page 28 of 177 ProSoft Technology, Inc.
August 16, 2013
2 Double-click the hardware address of the device to configure. This action
opens the NEW ENTRY dialog bow, populated with the device's Ethernet
Address (MAC).
3 Enter the IP Address to assign to the device, and click OK. You can leave the
HOSTNAME and DESCRIPTION fields blank.
Notice that the IP Address you assigned now appears in the Request History
pane. Notice also that the device now appears in the Relation List pane.
To assign this configuration to the device, select the device in the RELATION
LIST pane, and then click the DISABLE BOOTP/DHCP button. The device will
use the assigned configuration the next time it is powered up, and will no
longer issue DHCP requests.