User's Manual

RLX2 Series ♦ 802.11a, b, g, n RadioLinx Industrial Hotspot Browser
Industrial Hotspots User Manual
7.2 File Menu
The following commands are available on the File menu:
 Scan Setup (page 89)
 Scan (page 90)
 Clear (page 90)
 Import (page 90)
 Export (page 90)
 Freeze (page 90)
 Print (page 90)
 Print Preview (page 91)
 Print Setup (page 91)
 Exit (page 91)
7.2.1 Scan Setup
The Scan Setup command allows the configuration of settings that govern how
the IH Browser scans for radios. In the top field of the Scan Setup dialog box,
adjust how often the IH Browser program automatically scans for radios. Enter a
value in seconds.
In the New address/range fields, the program scan type can be adjusted for
radios. By default, the program sends a broadcast message to all the radios at
the same time, looking for a response. Broadcasts are limited to a local network,
and will not be passed through a router.
ProSoft Technology, Inc. Page 89 of 161
November 29, 2012