Instructions / Assembly

PARTS LIST

1. (8) Horizontal Crossbars

2. (4) Center Verticals

3. (2) Left & Right Rear Corner Verticals

4. (1) Left Front Corner Vertical

5. (1) Right Front Corner Vertical

6. (4) Wall Mount Flanges

7. (4) Wall Mount Extension Tubes

8. (12) Horizontal Sliderails

FASTENER LIST

1. (60) #08 x 3/4" Fastening Screws

2. (08) #08 x 1-1/2" Wall Mount

Extension Tube Fastening Screws

3. (12) #10 x 1-1/4" Wall Mount

Flange Screws

4. (12) Plastic Wall Anchors

TIP

Separate All Parts into

Groups (as shown)

and Familiarize

#3 #4

Solutions Murales PROSLAT inc.

225 Industriel blvd

Chateauguay (Quebec)

J6J 4Z2

ASSEMBLY INSTRUCTIONS

PAGE 1
Solutions Murales PROSLAT inc. 225 Industriel blvd Chateauguay (Quebec) J6J 4Z2 ASSEMBLY INSTRUCTIONS PARTS LIST #1 1. (8) Horizontal Crossbars 2. (4) Center Verticals #2 3. (2) Left & Right Rear Corner Verticals 4. (1) Left Front Corner Vertical 5. (1) Right Front Corner Vertical 6. (4) Wall Mount Flanges 7. (4) Wall Mount Extension Tubes 8. (12) Horizontal Sliderails #6 #7 #3 #4 #5 #8 FASTENER LIST 1. (60) #08 x 3/4" Fastening Screws 2.
PAGE 2
IMPORTANT: Do not install any fasteners until instructed! Numbers in BOLD indicate item number from Parts/Fastener Lists.
PAGE 3
IMPORTANT: Do not install any fasteners until instructed! JOINING FRONT TO REAR GRID Step 1 Step 2 Step 3 Insert Bottom Sliderails (#8) into Front Grid Assembly and fasten (making sure fully inserted) using 3- #08 x 3/4" Fastening Screws (#1) Note: Fasteners in Bottom Hole Only Insert and fasten next 3 rows of Sliderail to Front Grid using 9 - #08 x 3/4" Fastening Screws (#1) Note: Fasteners in Bottom Hole Only Turn unit upright and place firmly against wall where unit is to be mounted.