Instruction manual

AVT Prosilica GC Technical Manual V2.0.1
54
Camera I/O non-isolated user circuit example
Input: Incoming trigger must be able to source 10µA, at 3.3V. Input trigger voltage of > 5.5V will damage the camera.
Output: The maximum sync output current is 24mA, at 3.3V.
The non-isolated trigger circuit is connected to a Texas Instruments SN74LVC2G241 buffer/driver inside the camera. See the Texas
Instruments SN74LVC2G241 for more detailed information.
SYNC OUTPUT 2
SYNC INPUT 2 (3.3V DRIVER)
USERS TRIGGER CIRCUIT
12V POWER
1
2
3
4
5
6
7
8
9
10
1112
HIROSE HR10A-10P-12S
1
2
3
4
5
6
7
8
9
10
11
12
POWER GROUND
SYNC OUTPUT 2 (3.3V RECEIVER)
CABLE SIDE
POWER GROUND
SYNC INPUT 2
12V_POWER
Figure 36: Prosilica GC non-isolated user circuit