Instruction manual

AVT Prosilica GC Technical Manual V2.0.1
40
Camera attribute highlights
AVT GigE cameras support a number of standard and extended features. The table below
identifies the most interesting capabilities of this camera family. A complete listing of
GigE camera controls, including control definitions can be found in the AVT Prosilica
GigE Camera and Driver Attributes document:
AVT Prosilica GigE Camera and Driver Attributes document online:
http://www.alliedvisiontec.com/fileadmin/content/PDF/Software/Prosilica_software/Prosilica_firmware/
AVT_Camera_and_Driver_Attributes.pdf
Control Specification
Gain control Manual and auto
Exposure control Manual and auto
Whitebalance Red and blue channel; manual and auto control
External trigger event Rising edge, falling edge, any edge, level high, level low
External trigger delay 0 to 60 seconds; 1 us increments
Fixed rate control 0.001 fps to maximum frame rate
Imaging modes Free-running, external trigger, fixed rate, software trigger
Sync Out modes Trigger ready, trigger input, exposing, readout, imaging,
strobe, GPO
Region of Interest (ROI) independent x and y control with 1 pixel resolution
Multicast Streaming to multiple PC
Event Channel In-camera events including exposure start and trigger are
asynchronously broadcasted to the host PC
Chunk Data Captured images are bundled with attribute information
such as exposure and gain value
Table 16: Prosilica GC camera and driver attribute highlights