Instruction manual

37
Skatepal Pro
3
MAINTENANCE INSTRUCTIONS
• Control and clean the machine daily after the usage, and always after every 30 pairs of
skates.
• Remove the plug before carrying out any adjustment, servicing or maintenance.
• After 1-3 years or around 10,000~ cycles, service should be made by an authorized
service technician.
GRINDING WHEELS
Every delivery of a Prosharp SkatePal-Pro³ comes with a EP wheel. The EP wheels has
xed hollow with a range between Radius 7 all the way to FLAT. Most commonly used are
R16, R19 and R22.
Every B64 wheel lasts around 1000~ cycles
Change the grinding wheel according to the instructions. It is worn out when it is no longer
taking away material from the steel and/or gives an unsatisfying result.
TO CHANGE AN EP WHEEL
FOLLOW THESE INSTRUCTIONS:
1. Remove the lid at the front of the machine.
2. Press and hold the start/stop button for 5 seconds. The motor package will now start
to move, let go of the button once in a good working position.
3. Cut the power.
4. Loose the grinding wheel lock and remove the wheel.
5. Replace it with a new one and lock it.
6. Put the lid back on and turn on the power. The motor package will now return to its
home position.