Operating instructions

Page 3
workshop kip proof with padlocks, master switches, or by removing starter keys. Do not
overreach. Keep proper footing and balance at all times. Do not stand on the machine.
6. Never leave tool machine running unattended. Turn power off. Don’t leave tool until it
comes to a complete stop.
7. Use right tool. Do not use the tool for purpose not intended. Don’t force the machine. It will
do the job better and safer at the rate for which it was designed.
8. When not in use always disconnect the power cords.
9. Stay alert. Watch what you are doing, use common sense and do not operate the machine
when you are tired.
10. Check damaged parts. Before further use of the machine, it should be carefully checked to
determine that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts, mounting and any
other conditions that may affect its operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service centre otherwise indicated in this
instruction manual. Have defective switches replaced by an authorized service centre. Do
not use the machine if the switch does not turn it on and off.
11. Store the machine properly in a dry locked-up place, out of reach of children.
12. Never yank the cord to disconnect it from the socket. Keep the cord away from heat, oil and
sharp edges. Use proper extension cord. When tool is used outdoors, use only cords
intended for outdoor use and so marked. Make sure your extension cord is in good
condition. Be sure to use one heavy enough to carry the current your product will draw. An
undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
13. Avoid unintentional starting. Ensure switch is in “off” position when plugging in.
14. This electric machine should be repaired by qualified persons using original spare parts,
otherwise this may result in considerable danger to the user.
15. Maintain the machine with care. Follow instruction for lubricating and changing accessories.
Inspect machine cords periodically and if damaged have them repaired by an authorized
service facility. Inspect extension cords periodically and replace if damaged. Keep handles
dry, clean and free from oil and grease.
16. Disconnect machine before servicing; when changing accessories, such as grinding wheels
and diamond tools. Detailed instructions how the change the grinding wheel are on page 11
in this operation instruction manual. Other parts than those recommended by the
manufacturer may present a risk of personal injury.