Users Manual

4G LTE COMPACT INDUSTRIAL CELLULAR ROUTER_M330/M330-W - UM V1.1.8
106
VPN > L2TP
This section allows you to set up L2TP and provides three modes for configuration, including Off,
Server, and Client Mode.
(1) General Mode: The default mode is Off as shown in the following interface.
(2) Server Mode:
Choose the Server mode and the interface will be changed as below.
VPN> L2TP > Server Mode
Item
Description
Mode
Select from Off or On to set the client setting.
Auth
The authentication method for L2TP connection. Available options: PAP,
CHAP, MS-CHAP, MS-CHAPv2
Local IP
The virtual IP for L2TP server.
Remote begin IP
The begin address of L2TP client's IP pool.
Remote end IP
The end address of L2TP client's IP pool.
Username
The L2TP client's username. Could be used to add the newly client or
update existed client.