Users Manual

4G LTE COMPACT INDUSTRIAL CELLULAR ROUTER_M330/M330-W - UM V1.1.8
149
The VPN Network and VPN Netmask are required fields.
Note: The VPN Network should be network ID (e.g. 192.168.30.1 is invalid setting.)
When PC1 and PC2 communicate each other, the Route Client Networks should be enabled.
And add the LAN information of Open VPN client side, in this case the #1 route will be 10.0.0.0
and 255.255.255.0
Note: The #1 route means the routing information for User 1.
If all settings set up properly, the web UI will show the Apply OK and the Open VPN server
status should be Running. When Open VPN Client mode is connected, the status will show the
information which client is connected, IP address and connected time.
In the status, the CN field will indicate which client is connected and the user-00-00@Open
VPN value is from the User 1 certificate information. You can check it by clicking the information
button, the web UI will display the window as the below figure.
The CN information of user
certificate is as shown in the
subject field.