Specifications

4G LTE COMPACT INDUSTRIAL CELLULAR ROUTER_M330/M330-W - UM V1.1.8
84
11.2.2 IPsec > Authentication IDs
This section provides the authentication ID set to authenticate the IPsec connections.
In the default setting, the list of authentication ID is empty. You can create the new authentication
ID by click + Add Authentication ID button.
Note: Please apply the changes before editing the connection settings.
According to the above options, there are some combinations to authenticate the IPsec connection.
VPN > IPsec > Authentication IDs
#
ID
Type
Pre-shared
Key / X.509
Certificate
Comment
1
PSK
password
The default password for the PSK connections.
2
remote.
ip
sec
PSK
2wsx#EDC
The password only for the PSK connection with
remote.
IPsec ID.
Normally, this case will be used to authenticate
peer gateway.
3
local.
ip
sec
PSK
The identification for the connection.
Normally, this case will be used to
announce
the
ID of the router.
4
test
RSA
created
X.509
The ID field will be omitted, and use the
common name(CN) of X.509 as the ID field.
VPN > IPsec > Authentication IDs
Item
Description
ID
The identification for authentication.
It only work on PSK type.
Type
Select from PSK or RSA. The default is PSK.
z PSK: Use the pre-shared key to authenticate the connection.
z RSA: Use the certificate to authenticate the connection.
Pre-shared Key /
X.509 Certificate
The X.509 certificate for authentication.
The certificate could be generated or imported by X.509 Certificates section.