Specifications

4G LTE COMPACT INDUSTRIAL CELLULAR ROUTER_M330/M330-W - UM V1.1.8

System > Alarm

This section allows you to configure the alarm.

Note:

(1) If you select SMS in Alarm input/output, you need to add the trust phone number into

Contracts/ On Duty.

(2) If you select SNMP trap in Alarm output, you need to set up SNMP trap configuration from

Service SNMP.

(3) If you select E-Mail in Alarm output, you need to set up SMTP configuration from Service

SMTP.

(4) If you select TR069 in Alarm output, you need to set up TR069 configuration from Service

TR069.

System > Alarm

Item

Description

Mode

Turn on/off the Alarm configuration. Select from Disable or Enable. The

default is Enable.

Alarm Input

Select from SMS, DI 1, DI 2, VPN disconnect and WAN disconnect as input

to trigger alarm.

z SMS: It means on duty team members on Contacts / On Duty

can send

SMS to the phone number of using SIM card to trigger alarm.

z DI: IO to trigger alarm.

z VPN disconnect: All tunnels get disconnected then trigger alarm.

z WAN disconnect: WAN connections get disconne

cted then trigger alarm.

z LAN disconnect:

LAN connection get disconnected then trigger alarm.

z Reboot: Reboot then trigger alarm.

Alarm Output

Select from SMS, DO, SNMP trap and E-mail as alarm output.

DI 1 / 2 Trigger

Select from High or Low. The default is High Trigger.