User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
95
Note:
(1) This option only work on Policy-based IPsec VPN type.
(2) This option will be setup as 0.0.0.0/0 automatically on IPsec Route-based
VPN.
(3) This option will be omitted when the service option is L2TP.
(For host-to-host connection only)
Remote
Subnet
The private subnet behind the peer gateway.
The available formats are A.B.C.D, A.B.C.D/M, A.B::C.D or A.B::C.D/M
If this value is blank, the connection will set it as the `Remote Host` of Phase
1 setting.
Note:
(1) This option only work on Policy-based IPsec VPN type.
(2) This option will be setup as 0.0.0.0/0 automatically on IPsec Route-based
VPN.
(3) This option will be omitted when the service option is L2TP.
(for host-to-host connection only)
Service
Restrict the VPN traffic to the particular protocol only.
Select from the Any, TCP, UDP or L2TP.
(3) IPsec Advance Setting
11.2.2 IPsec > Authentication IDs
This section provides the authenticaion ID set to authenticate the IPsec connections.
In the default setting, the list of authentication ID is empty. You can create the new authentication
ID by click + Add Authentication ID button.
Note: Please apply the changes before editing the connection settings.
VPN > IPsec > Connections > Advance Setting
Item
Description
DPD interval
The period time interval to detect dead peers.
The default is 30 seconds.
DPD retry
The max number of retry of dead peer detection.
The default is 5 times.