User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
90
VPN > Open VPN > Server VPN Mode
Item
Description
Server
VPN Network
The network ID for Open VPN virtual network.
VPN Netmask
The netmask for Open VPN virtual network.
Roadwarrior:
Route Client Networks
Select from Off or On. The Open VPN server will route the client
traffic or not. User should fill in the client IP and netmask when this
option is enabled.
NAT
1:1 NAT
 Tick to enable NAT Traversal for Open VPN. This item must be
enabled when router under NAT environment.
 Select from Off or On. The default is Off.
 When two routers’ LAN Subnet are same and create Open VPN
tunnels, this function is turned on.
Server- Server Security
Root CA
Create Root CA key.
Cert, Key and DH
Create Cert, Key and DH key.
Server- User Security
User 1 - User 8
According to your requirement, you can create different kinds of
user security key from User 1 to User 8.
11.1.4 Set up Open VPN Custom
For Custom of VPN Mode, this section helps you use the .ovpn configuration file to quickly set
up VPN tunnel with third-party server or use the Open VPN advance options to be compatible with
other servers.
Note:
 When clicking the button, you can import third-party Open VPN
configuration that find out from Internet and save the document into your server or PC.
 After importing the file, the interface will show button. Click for displaying
the information and for downloading the file.
 For third-party Open VPN configuration, suggest from http://www.vpngate.net/en/