User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
88
11.1.2 Open VPN Client Setting
Select option “Client” from VPN Mode, and this section allows you configure the Open VPN client
route and authentication files.
The files could be imported by clicking Import button and the file should be downloaded from Open
VPN server.
VPN > Open VPN > Client VPN Mode
Item
Description
Client
Server Address
Fill in WAN IP of Open VPN server.
Route Client Networks
Select from Off or On. This setting needs to match the server
side. When enabled, the cellular router will auto apply the
properly routing rules.
NAT
1:1 NAT
 Tick to enable NAT Traversal for Open VPN. This item must
be enabled when the router under NAT environment.
 Select from Off or On.
 When two routers’ LAN Subnet are same and create Open
VPN tunnels, this function should be turned on.
Client-Security
Root CA
The Certificate Authority file of Open VPN server could be
downloaded from Open VPN server.
Cert
The certification file is for Open VPN client, which could be
downloaded from Open VPN server.
Key
The private key file is for Open VPN client, which could be
downloaded from Open VPN server.
P12
The PKCS#12 file is for Open VPN client, which could be
downloaded from Open VPN server.