User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

IP Routing > OSPF > Interfaces

Item

Description

Mode

Select from Off or On to use or not to use the OSPF function in the interface.

Interface

Select from eth1 (WAN Ethernet) or LAN.

Authentication

Select from none or md5 to approve authentication.

Note:

Please offer Key and Key ID when you select md5 to use HMAC-MD5.

Key

The key used for authentication (maxlength=16).

Key ID

The ID of the key used for authentication (1-255).

Cost

The cost for sending packets via this interface (0: OSPF defaults).

Passive

Select from Off or On to send out or not to send out OSPF packets on this

interface.

(3) Networks Configuration

There are 2 parts for OSPF Networks configuration.

 OSPF Networks Summary

You can edit and delete the existed OSPF networks.

 OSPF Networks Add/Edit

This sub configuration is used to configure all the networks, the maximum is 2.