User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

IP Routing > RIP > Interfaces

Item

Description

Interfaces

Mode

Select from Off or On to use or not to use the RIP function in the interface.

Interface

Select from eth1 (WAN Ethernet) or LAN.

Authentication

Select from none or md5 to approve authentication.

Note:

Please offer Key and Key ID when you select md5 to use HMAC-MD5.

Key

The key used for authentication (maxlength=16).

Key ID

The ID of the key used for authentication (1-255).

Passive

Select from Off or On to send out or not to send out RIP packets on this

interface.

IP Routing > OSPF

This section allows you to set up OSPF with three sub configurations, including General,

Interfaces and Networks configuration.

(1) General Configuration

IP Routing > OSPF > General

Item

Description

General

Mode

 Off：OSPF function is off.

 On：OSPF function is on.

Redistribute local routes

 Off：Not redistribute local routes from the device's own routing

table.

 On: Redistribute local routes from the device's own routing

table.

Redistribute connected

routes

 Off：Not redistribute connected routes to networks which are

directly connected to the device.