User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

 Type 2:

For 3-port LANs, the VLAN Mode allows you to select Off, Tag Base (802.1p) or Port Base.

When VLAN Mode is set to Tag Base, the VLAN setting window will appear as shown below.

The VLAN Isolation function allows administrator to separate the different Subnet (VLAN). When

it is on, the different Subnet (VLAN) user cannot communication each other.

For each row, the settings can be enabled or disabled by checkbox and select the Subnet and

the VLAN ID (VID). The Subnet sets up the IP address and IP mask for the router so this router

can communicate with the third party by this IP address and IP mask on this VLAN. (

Note: The

NET1 can’t remove it and fixes in the first column.)

Furthermore, the Subnet provides DHCP Server function to allow the third party for the same

VLAN to get IP address and IP mask. Therefore, you do not need to configure manually.

(

Note: The subnet information will show the Subnet window from the LAN catalogue.)

There are three ports for Tag Base Mode, including LAN1, LAN2 and LAN3. And one Router port