User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

When VLAN Mode is set to Tag Base, the VLAN setting window will appear as shown below.

For each row, the settings can be enabled or disabled by checkbox and select the Subnet and

the VLAN ID (VID). The Subnet sets up the IP address and IP mask for the router, so this router

can communicate with the third party by this IP address and IP mask on this VLAN. (

Note: The

NET1 can’t remove it and fixes in the first row.)

Furthermore, the Subnet provides DHCP Server function to allow the third party for the same

VLAN to get IP address and IP mask. Therefore, you do not need to configure manually.

(

Note: The subnet information window will show from LAN > Subnet.)

LAN > VLAN (1-port LANs)

Item

Description

Mode

The VLAN mode is Off or Tag Base (802.1p VLAN).

Enable

The assigned row of setting is enabled.

Subnet

The subnet provides IP address and IP mask for the router.

VID

The VLAN ID range is from 1 to 4094.