User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

LAN > IPv6

Select your type of IPv6, which shows Delegate Prefix from WAN or Static, and then set up

DHCP Server Configuration, including Address Assign, DNS Assign and DNS Server.

LAN > VLAN

This section allows you to set up VLAN that provides a network segmentation system to

distinguish the LAN clients and separate them into different LAN subnet for enhancing security

and controlling traffic.

There are two router models based on the numbers of LAN ports to have two setting types of

VLAN and communicate with your devices, one is 1-port LAN and the other is 3-port LANs.

 Type 1:

For 1-port LAN router model, you can use the Type 1 to configure VLAN. First, the VLAN Mode

allows you to select Off or Tag Base (802.1p).

LAN > IPv6

Item

Description

Type

 Delegate Prefix from WAN

Select this option to automatically obtain an IPv6 network prefix from the

service provider or an uplink router.

 Static

Select this option to configure a fixed IPv6 address for the cellular

router’s LAN IPv6 address.

Static Address

You need to input the static address when you select the static type.

DHCP Server Configuration

Address Assign

Select how you obtain an IPv6 address.

 Stateless: The cellular router uses IPv6 stateless auto configuration.

RADVD (Router Advertisement Daemon) is enabled to have the cellular

router send IPv6 prefix information in router advertisements periodically

and in response to router solicitations.

 Stateful: The cellular router uses IPv6 stateful auto configuration. The

LAN IPv6 clients can obtain IPv6 addresses through DHCPv6.