User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
45
6.2.2 Ethernet Ping Health
If you configure “WAN Priority” to “Auto” mode, the system would choose the cost effective
connection first such as Ethernet. However, in case the Ethernet connection exist but it is unable
to access internet; you can enable “Ethernet Ping Health” and the system would switch to LTE
connection and switch back whenever Ethernet is able to access internet again.
WAN > Ethernet > Ethernet Ping Health
Item
Description
Ethernet Ping Health
Select from Disable or Enable. The default is Enable.
Interval
The interval is from 1 to 60 seconds.
IPv4 Host 1
Input the address of IPv4 Host 1.
IPv4 Host 2
Input the address of IPv4 Host 2.
IPv6 Host 1
Input the address of IPv6 Host 1.
IPv6 Host 2
Input the address of IPv6 Host 2.
Hint
Show the usage descriptions.