User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8

System > Ethernet Ports

Item

Description

Ethernet Ports Status

Show the connectivity status of LAN and WAN.

Ethernet Ports Configurations

Select from Auto, 100M Full, 100M Half, 10M Full, 10M Half

and Disable.

WAN Ethernet

MTU is the Maximum Transmission Unit that can be sent

over the WAN Ethernet interface. It allows users to adjust

the MTU size to fit into their existing network environment.

Flow Control

Allow user to control the traffic ingress from Ethernet LAN

or WAN.

System > Modbus

This section allows you to configure the Modbus.

Note: This configuration is for Modbus TCP and the function is only for COM 3 (RS485).

System > Client List

This section allows you to understand how many devices have been connected and their status

from the router. There are two types, one is DHCP Client and the other is Online. The default is

both types to show all status when the router is on DHCP Client and Online.

For DHCP Client type, the information shows IP address, MAC address, Hostname and the expiry

time of IP (Start/End).

System > Modbus

Item

Description

Mode

Select from Disable or Enable.

Port

The listening port of Modbus TCP.