User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
34
System > Alarm
Item
Description
Mode
Turn on/off the Alarm configuration. Select from Disable or Enable. The
default is Enable.
Alarm Input
Select from SMS, DI 1, DI 2, VPN disconnect and WAN disconnect as
input to trigger alarm.
 SMS: It means on duty team members on Contacts / On Duty can
send SMS to the phone number of using SIM card to trigger alarm.
 DI 1/2: IO to trigger alarm.
 VPN disconnect: All tunnels get disconnected then trigger alarm.
 WAN disconnect: WAN connections get disconnected then trigger
alarm.
 LAN disconnect: LAN connection get disconnected then trigger
alarm.
 Reboot: Reboot then trigger alarm.
Alarm Output
Select from SMS, DO, SNMP trap and E-mail as alarm output.
DI 1 / 2 Trigger
Select from High or Low. The default is High Trigger.
 High: SW is On to trigger.
 Low: SW is OFF to trigge.
DO behavior
 Always: Pull DO high.
 Pulse: High and Low continuously.
 Pulse Time Length: Pulse time length (mini seconds).
SMS/E-mail
Write your messages and limit 150 English characters for the
messages to deliver.
5.4.1 Alarm > Contacts > Create and name the Group
 Click trusted and on duty members for naming and the interface will show the group’s name
in the Group setting as below.