User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
31
Stop
Select from 1 bit or 2 bit.
Flow Control
Select from none, Xon/Xoff or hardware.
Virtual COM
Mode
Select from Disable, Server or Client.
Protocol
Select from TCP or UDP.
Host Address
The host address is only available on client mode. Specify
what the domain name or IP address (IPv4 or IPv6) to be
connected.
Redirect Port
 Server Mode: This network package of cellular router is on
this port.
 Client Mode: The network package of remote device is on the
remote host.
System > Logging
This section allows cellular router to record the data and display the status of data.
5.3.1 Logging > Logging
(1) Logging section provides you to control all logging records.
(2) Users need to select Apply to confirm your settings.
System > Logging > Logging
Item
Description
Mode
Turn on/off the logging configuration. Select from Disable or Enable.
The default is Enable.
Remote Log
The logging messages send to remote log or not. Select from Disable
or Enable. The default is Disable.
Log Server Address
When you choose “Enable” on Remote Log, you should input IP
address to save and receive all logging data.
(Note: This server should have installed Log software.)