User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
228
There are two examples to introduce how to work for routing.
Example 1: Add IP Routing on LAN interface
 Step 1: The cellular router for Static Route configuration
The Mode is on at the settings section and add the routing.
 Step 2: Router-1 configuration is as below.
(1) Login to the Router-1 web site, and then "NAT disable".
(2) Configure LAN IP: 192.168.10.1
(3) Configure WAN IP: 192.168.1.50
 Result: PC-A sends ICMP packet to Router-1 LAN and WAN IP and they should have response.