User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
155
The QoS entry configuration page has three parts for classify traffic, assign bandwidth, and group
IP address bandwidth.
1. Classify traffic by following items:
Service > QoS > Edit QoS Entry
Item
Description
Mode
Select from Disable or Enable QoS.
Name
The setting can be edited or deleted the existed entries.
Interface
The interface of QoS entry is either WAN Ethernet or LTE and both
options.
Direction
 When selecting Upstream for LAN to WAN traffic, the Port
Begin/End is for public server.
 When selecting Downstream for WAN to LAN traffic, the Port
Begin/End is for public server.
 When selecting Upstream (LAN server) for WAN to LAN traffic, the
Port Begin/End is for LAN server.
 When selecting Downstream (LAN server) for LAN to WAN traffic,
the Port Begin/End is for LAN server.
 Downstream (LAN server) is for LAN to WAN traffic, and the Port
Begin/End is for LAN server.
IPv4v6 Address
Choose four types to set address format, including All, Single, Subnet,
and Range.
 All is for none.
 Single is for single IP address.
 Subnet is for IP address with subnet mask bit.
 Range is for the specified range between two IP addresses.
Hint:
When [RANGE] is selected, compare the difference from left to right
octet and find out different octet for setting the specified range of IP
address. All other parts after different octet would be ignored.
Protocol
 All is for none.
 UDP is for User Datagram Protocol.
 TCP is for Transmission.
Port Begin/Port End
the TCP/UDP service port
VLAN follow vid of
 NONE
 NET1 - NET8
Note: For NET1 to NET8, make sure the related subnet is enabled at
VLAN→Tag Base. The VLAN ID, vid, will be the VID field of the related
Subnet at VLAN→Tag Base.
COS
(Class of Service or
802.1q)
NONE or 0~7. It is class of service for VLAN.