User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
140
Note: Please not include “https://” or “http://” for the URL address in the Full Filter.
Firewall > URL Filter
Item
Description
Mode
Select from Disable or Enable. The default is Disable.
Filter
Select from Key or Full. The default is Key.
Key / Full
Fill in your Key / Full information.
Firewall > NAT
This section allows you to set NAT configuration.
When NAT is on, the router will replace the source private IP address by its Internet public address
for outgoing packets, and replace the destination Internet public address by private IP address
for incoming packets.
When NAT is off, the router will send the source LAN private IP address for outgoing packets and
allow to receive the destination LAN private IP address for incoming packets.