User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
120
 Spoke 1 configuration
Spoke 1 IPsec configuration
1. Change Mode from Disable to Enable.
2. Change Type from Policy-based to Route-based.
3. Navigate to the
Authentication IDs tab.
4. Add default pre-shared key
(1) ID:
(2) Type: PSK
(3) Pre-shared Key: defaultpsk
5. Add one authentication ID
(4) ID: spoke1
(5) Type: PSK
(6) Pre-shared Key: testspoke1
6. Apply the changes
7. Navigate to the
Connections tab.
8. Add IPsec connection
(7) Edit the phase 1 setting
(8) Change Mode from Disable to Enable.
(9) Change the Local ID and select the spoke1 (PSK) authenticaion ID.
(10) Fill the IP address of VPN server to Remote Host field.
 e.g. Remote Host: 10.0.0.1
(11) Save the changes
9. Apply the changes