User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
119
 Hub Static Route configuration
1. Navigate to the IP Routing > Static Route page
2. Add the static route for IPsec Spoke 1 connection
 Mode: On
 Destination: 192.168.100.0/24
 Interface: Select the IPsec interface by connection number
 e.g. If your IPsec connection is #1 then the interface should be IPsec#1.
3. Add the static route for IPsec Spoke 2 connection
 Mode: On
 Destination: 192.168.200.0/24
 Interface: Select the IPsec interface by connection number
 e.g. If your IPsec connection is #2 then the interface should be IPsec#2.
4. Apply the changes