User's Manual

INDUSTRIAL 4G LTE CELLULAR ROUTER - UM V1.1.8
103
Configure Net-to-Net VPN Client
1. Change Mode from Disable to Enable.
2. Navigate to the
Authentication IDs tab.
3. Add the authentication ID
 Keep ID as blank, Type as PSK and fill the password to Pre-shared Key field.
4. Apply the changes
5. Navigate to the Connections tab.
6. Add IPsec connection
(1) Edit the phase 1 setting
(2) Change Mode from Disable to Enable.
(3) Fill the IP address of VPN server to Remote Host Field.
 e.g. Remote Host: 10.0.0.1
(4) Save the changes
(5) Edit the phase 2 setting
(6) Fill up the Local Subnet and Remote Subnet.
 e.g. Local Subnet: 192.168.200.0/24, Remote Subnet: 192.168.100.0/24
(7) Save the changes
7. Apply the changes