Users Manual

Sound
distortion/rattle
Reduce the volume level of the paired/
connected device.
Bluetooth
r
eception failure
Place the external BT device close to
the sounbar.
Not paired
Pair the unit with the BT device as the
procedures stated in this manual.
Input source incorrect
The sounbar is in power off
mode
The paired/connected
device is not in playback
mode
The external device is
too far from the sounbar
Remote Control
not functioning
Out of range
The battery in the remote
control is drained
Point the remote control to the remote
sensor on the sounbar within 16 feet,
+/-30 degrees.
Replace with new battery.
No sound or
sound weak
Volume level in minimum
position
SYMPTOM
TROUBLESHOOTING
POSSIBLE SOLUTION
No power
The adapter is not connected
Connect the adapter to the sounbar and
wall outlet.
Press and hold the POWER/SOURCE
button on the sounbar or press the button
on remote control to power on the sounbar
.
Raise the volume level by pressing the
+ button on the soundbar Or press
VOL+ button on remote control.
Press the POWER/SOURCE button
repeatedly on sounbar or press the
desired mode button on remote control
to switch mode.
Reduce the volume level by pressing
the - button on the top of the sounbar
Or press VOL- button on remote control.
18
Play music/movie in the paired/
connected device as usual and make
sure the volume level of it is in high
level.
Volume level too high
POSSIBLE CAUSE