Specifications

BACK PANEL
rAuo,o- A.T.,.
@ @ L .FOUT
OUT -- IN
L. VIDEO _
CH. 3/4 switch Determines the channel to which the TV must
be tuned in order to see the VCR's picture. Not used when
connecting the VCR to the TV using Audio/Video cables.
AUDIO (R and L/MONO) and VIDEO IN jacks Receives
signals from another component, such as a VCR or camcorder,
when connected to these jacks. Use the INPUT button on the
VCR or remote control to select the video line input (LI) and
record from these jacks.
AUDIO (R and L) and VIDEO OUT jacks Sends signals from
the VCR to another component, like a TV or VCR, when the
other component is connected to these jacks.
IN FROM ANT. jack Receives a signal from an antenna or
cable system when the VCR is attached with RF cables.
OUT TO TV jack Passes signal to TV using the supplied RF
cable.
70