Specifications

TV WITH AUDIONIDEO JACKS AND

DIGITAL SATELLITE RECEIVER

THIS CONNECTION ASSUMES:

• You have an advanced digital satellite system and your TV

has audio/video input jacks.

THIS CONNECTION PROVIDES:

• Stereo sound playback from VCR, recording from receiver

while watching cable or off-air channel, and recording one

cable or off-air channel while watching another.

TO USE THIS CONNECTION, YOU MUST HAVE:

• (3) coaxial cables and (6) audio/video cables

IF THE VCR CAN CONTROL YOUR SATELLITE RECEIVER:

• Position it above the VCR as shown. Make sure not to block

any of the VCR's ventilation holes.

TO CONNECT:

1. Connect cables as shown.

2. Return to the First Things First Section, then follow the steps.

USING THIS CONNECTION

• Tune your TV to its video input to record (or watch) the VCR

or satellite receiver.

• To record from the digital satellite receiver, tune your VCR to

its line input (L1 if you have connected the receiver to the

back jacks or L2 for the front jacks).

AUTO TVNCR SETTING:

• Set the Auto TV/VCR feature to OFF. Use of TV•VCR button

on the VCR (ANTENNA on remote) is not required.

TO PLAY A TAPE:

1. insert a tape.

2. If necessary, press PLAY.

TO RECORD ONE OFF-AIR OR CABLE PROGRAM AND

WATCH ANOTHER:

1. Begin recording a program using a recording feature.

2. Select a different channel on the TV.

TO RECORD A DIGITAL SATELLITE RECEIVER PROGRAM

AND WATCH A CABLE OR OFF-AIR CHANNEL:

1. Turn on the receiver, tune the VCR to its line input, and

begin recording a program using a recording feature.

2. Select a different channel on the TV.

Position Remote-Controllable

Cable Box

VCR

222222"'222222222222222

TRANSMITTER

VCR'S

SIGNAL