Specifications

TV WITH AUDIO/VIDEO JACKS AND

CABLE BOX TO UNSCRAMBLE PAY

CHANNELS ONLY

THIS CONNECTION ASSUMES:

• You are using a cable box on]y to unscramble premium

channels.

• Your TV has audio/video input jacks.

THIS CONNECTION PROVIDES:

• Stereo sound playback from VCR.

• Recording a scrambled or unscrambled channel through the

cable box while watching an unscrambled channel.

TO USE THIS CONNECTION, YOU MUST HAVE:

• (3) coaxial cables

• (3) audio/video cables

• (1) splitter

IF THE VCR CAN CONTROL YOUR DIGITAL SATELLITE

RECEIVER:

• Position it above the VCR as shown. Make sure not to block

any of the VCR's ventilation holes.

TO CONNECT:

1. Connect cables as shown.

2. Return to First Things First, then follow the steps.

USING THIS CONNECTION

Tune your TV to its video input channel. Use of TVoVCR button

on the VCR (ANTENNA on remote) is not required.

AUTO TVNCR SETTING:

• Set the Auto TV/VCR feature to OFF.

TO PLAY A TAPE:

1. Insert a tape.

2. If necessary, press PLAY.

TO RECORD A SCRAMBLED OR UNSCRAMBLED PROGRAM

AND WATCH ANOTHER UNSCRAMBLED PROGRAM:

1. Begin recording a scrambled or unscrambled program

through the cable box using one of the recording features.

2. Select an unscrambled channel on the TV.

Position Remote-Controllable

Cable Box

VCR

TRANSMITTER

VCR'S

SIGNAL

All scrambled channels must be }

viewed through theVCR.

For Cable Box Setup, select ALL

channels (see Setting Up the VCR).

CABLE