Specifications

TV WITH RF JACK ONLY

THIS CONNECTION ASSUMES:

• You are connecting antenna, cable, or cable box system.

• Your television has only an RF input jack.

THIS CONNECTION PROVIDES:

• Mono sound playback from VCR.

• Record one channel while watching another (except

when using a cable box for all channels).

TO USE THIS CONNECTION, YOU MUST HAVE:

• One coaxial cable for cable or antenna connection; two

cables for a cable box

IF THE VCR CAN CONTROL YOUR DIGITAL SATELLITE

RECEIVER:

• Position it above the VCR as shown. Make sure not to

block any of the VCR's ventilation holes.

TO CONNECT:

I. Connect cables as shown.

2. Return to First Things First, then follow the steps.

USING THIS CONNECTION

Tune your TV to channel 3 or 4, whichever one you selected

with the CH. 3/4 switch on the back of the VCR.

Position Remote-Controllable

Cable Box

VCR

2_22:_"_2;222222222222 TRANSMITTER

VCR'S

SIGNAL

AUTO TVNCR SETTING:

• Set the Auto TV/VCR feature to ON.

TO PLAY A TAPE:

1. Insert a tape,

2. If necessary, press PLAY.

TO RECORD ONE PROGRAM AND WATCH ANOTHER:

I. Begin recording a program using one of the

recording features.

2. Press the TV•VCR button on the VCR (ANTENNA on

remote) and select a different channel on the TV.

VCR

CABLE, CABLE BOX, OR ANTENNA_