Specifications

CHOOSING A VCR CONNECTION

There are several different ways to connect your VCR,

depending on whether or not you have cable service, if you

have a cable box to see this service, whether some of the cable

channels are scrambled, and so on.

Five connections are described in this section and one of them

should provide you with a VCR connection that works.

• TV with RF jack only

• TV with audio/video jacks

• TV with audio/video jacks and cable box to unscramble pay

channels only

• TV with RF jack and satellite receiver

• TV with audio/video jacks and satellite receiver

If you need to connect additional components not shown in the

diagrams here (and are unsure of how to connect them), refer to

the instruction manual that came with that particular

component.

ADVANTAGES OF AUDIONIDEO CABLE

CONNECTIONS

Using a simple antenna cable connection gives you good

picture quality. If your television has audio/video jacks, it is

highly recommended to use them for even better picture quality

and stereo sound when recording and playing back videotapes.

These connections give you more convenient operation by not

having to share the TV's antenna signal.

DON'T FORGET ABOUT THE

AUTO TVNCR FEATURE

The TV/VCR switch controls whether the picture signal is

coming from the VCR or the TV.

You can set the Auto TV/VCR feature to ON when using only the

IN FROM ANT. and OUT TO TV jacks and OFF when using the

AUDIO/VIDEO output jacks--so your TV signal is not

interrupted when the VCR is turned on. You can change the

setting manually by using the TV.VCR button on the VCR or the

ANTENNA button on the remote.