Specifications

STEP 1: WHAT'S IN THE Box?

The following items come packed in the box:

• • VCR

• Remote control

• RF coaxial cable

STEP 2: INSTALL BATTERIES

THE REMOTE CONTROL

Follow these steps whenever you need to install or change the

batteries in your VCR's remote.

Remove the cover of the battery compartment.

Place the batteries into the remote's back panel. Match the

positive (+) and negative (-) ends of each battery to the

diagram inside the battery compartment.

3. Replace the cover.

L _

.-:

QQq

STEP 3: CONNECT YOUR VCR

if you connect your VCR to your home antenna or cable system

and then to your TV, use the VCR's ANT. IN and RF OUT jacks

for a good signal as shown to the right.

If you have a TV with AUDIO/VIDEO jacks, use the jacks for a

better connection. Refer to the section, Connections, toward

the back of the manual, for additional connection options.

STEP 4: PLUG IN THE VCR

Your VCR's power cord has a plastic band strung through the

blades. Remove plastic band before plugging the cord into the

power outlet. To remove band, cut with a pair of scissors and

pull it free of the blades. Once the plastic is removed, match the

wide blade of the power cord to the wide slot in the AC outlet.

Be sure to insert the plug completely.

Coaxial Connection

CABLE, CABLE BOX, OR ANTENNA

VCR

I I