Specifications

COMMERCIAL ADVANCE PLAYBACK

Press 2 to switch between Playback: AUTO and MANUAL.

• Select AUTO to have the VCR automatically advance

through the blocks of marked commercials.

* It works with most 30, 45, and 60-second commercials.

* A commercial group starting with the first two minutes or

last two minutes of a recording will not automatically be

skipped.

A commercial will not be skipped if a recording starts in the

middle of a commercial segment, one isolated commercial

is shown without others, or a commercial is longer than one

minute. Press FWD on the VCR (FORWARD on remote) to

scan through the commercial.

Part of a recorded program may be skipped if the program

segment is either between commercials and is less than one

minute, or there are frequent dark and quiet scenes in the

program. If this happens, automatic skipping can be

temporarily stopped by pressing PLAY (or STOP) on the

remote control while that portion of the tape is being

skipped. Then, reverse the tape back to a point just before

the segment starts and press PLAY. Automatic skipping will

be re-enabled after the VCR detects the end of the segment.

• Select MANUAL and the VCR won't advance through the

blocks of marked commercials until you press SEARCH.

If you press SEARCH during playback of material other than

commercials, the VCR advances to the end of the next "marked"

commercial block and resumes playback.

The VCR resumes playback when it reaches the end of the

marked commercials.

COMMERCIAL ADVANCE DISPLAY

Press 3 to switch between Display: BLUE or VIDEO.

• Select BLUE to display a blue background when the VCR

advances through the block of marked commercials.

• Select VIDEO to display the recorded video when the VCR

advances through the block of marked commercials.